Cardboard Portrait

15MarquezStudent_2013smIn this project reclaimed cardboard is used to construct self portraits. The cardboard image and structure emphasize the importance of reusing and recycling materials and should provide an inspiring example of creative thought and innovation through repurposing materials.

Mission: Self Portrait

Develop a self portrait using an image of yourself, a word that reflects who you are, and cardboard. Any photo that shows a true likeness of your face can be used. A sheet of cardboard will be your canvas. The goal is to use a subtractive and additive method to develop a portrait using the layers of corrugated cardboard. The finished portrait should be a minimum of 11 x 17  inches. You may go larger.

Project Description/Outline:

  1. Begin with a photograph: A digital file will allow you to enlarge the image to fit your canvas. It will also allow you to add and compose text digitally.
  2. Prepare cardboard canvas. Sized to be fit with the chosen image. It is critical to have all image corners at 90º if you intend for the frame to be a true rectangle or square. Note: I usually refer to 90º corners as “square”.
  3. The image should be altered to black and white. This should be done to a point where the image is made up of positive and negative fields (areas). The average rendering can be made up of very little to no gray areas. This can be done by drawing or tracing the image paying close attention to these areas. You may expand the pallet to include multiple layers in accord with varying degrees of grey. Note: the image above has Three layers to develop the image: black, white and an exposed corrugated layer. Explore the possibilities.
*An alternative to this “hand and eye” design strategy is to put the image in photoshop and alter it to black and white and then the “Threshold” settings can be altered to get the image to your preference.
  4. Choose a word and font that best represents your personality. Develop them into your composition. The word or words must be at least seven characters.
  5. You will need to enlarge the image dimensions to the appropriate size.
  6. After a paper composition has been produced the image will need to be transferred to cardboard. Lightly mark the areas that separate positive and negative sections of the image. If you plan to strengthen the image quality with your own aesthetic this would be a good time to do so.
  7. Once transferred to the cardboard the image is ready to be developed by cutting, tearing and sanding away either the negative or positive areas. It may be necessary to darken the negative areas or pencil marks so they can be seen better in production. Your final image should have no pencil marks.Tearing and cutting away dark areas usually works best. What other methods can you explore and develop?
  8. Finally: Create a a frame of cardboard around your cardboard Portrait. 2 inch thick minimum. This can be done by layering strips of cardboard to create a thicker board. It is a good idea to experiment and create these strips/boards well in advance so they are ready when you are ready to complete the project. Be creative, What can be done to make the frame more interesting? Note: Exposed corrugated layers should be used as the face of the frame structure. The method demonstrated in class functions more structurally and can create an unexpected aesthetic to the project as a whole.
  9. Craft is important: Cuts and joints well executed. Clean up glue and pencil marks.

NOTE: Please refrain from cutting on table surfaces. Use a matt of cardboard or other material if you use the table. The floor works well to give one space to work and cut without damaging the table surfaces.

Research:

  • Low Relief
  • Rubber Stamps
  • Negative and Positive imagery
  • Cardboard: Material Properties
  • Texture by Exposing layers
  • Stencils
  • Screen Printing

Tools and Materials:

  • Utility Knife
  • Exacto or Hobby Knife
  • Cardboard
  • Card board paper
  • Pencils
  • Graphite
  • Adhesive (wood glue)
  • Masking tape
  • Transfer paper (optional)

Objectives:

Materials Characteristics:

  • Cardboard: Flat surfaces
  • Card board: Lamination
  • Laminated Layers
  • Skin
  • Corrugation (plains and patterns)

Concepts:

  • Elements of Design
  • Principles of Design
  • Composition
  • Texture
  • Pattern
  • Unity
  • Balance
  • Relief
  • Sensibility to form:
  • Representational Forms
  • Abstract Forms
  • Non-Objective Forms

Methods:

  • Technique
  • Cutting Safely
  • Thinking from 2-d to 3-d, layers
  • Organizing the surfaces of a corrugated cardboard plane to alternate between textures.
  • Developing Craftsmanship

Note: Use only Cardboard and Glue. No crayons, paints, chalks or inks. Factory pre-printed or pre-colored papers are fair game.

Create a label for your project with these specifics:

  • Name:
  • Dimensions: HWD
  • Materials:
  • Year Complete:
  • Course:
  • Tape your label in upper right corner of the back of your project.

Research/Inspiration: 

Project Gallery

Texture Switch

Bader2

Mission: (Project Description)

Within this project, we will bring into question the “skin” of an object, and how alterations to it, alters our own perceptions of the object.  Many artists, such as, Meret Oppenheim, Lucas Samaras, and Joseph Beuys, have pursued this concept creating works that question or negate an objects original function.  The simple manipulation of a surface can allow strong conceptual narratives to develop, speaking to a greater importance beyond the original object.

Transform: v.  1 make a thorough or dramatic change in the form, appearance, character, etc.

Mission:

  • Bring to class three (3 dimensional) objects.
  • Object should not be smaller than 12 inches or larger than 24 inches.
  • A class discussion of objects will occur.
  • Consider the objects conceptual importance relative to its potential transformation.
  • Select one object from the initial three. Select the object with a strong visual presence.
  • Students should select one material in which to cover the chosen object.  This material should be an antithesis to the original object, or draw into question the function or accepted meaning of the object.
  • Repetition and a obsessive development of the surface is a critical component of developing this project. Choose a material that will draw emphasis to this concept.
  • Objects must be completely covered by the chosen material. Students should focus on the obsessive nature involved in covering the objects.

Project Vocabulary: 

Pattern
Texture
Variety
Rhythm
Direction
Movement
Repetition
Contrast
Natural Texture
Visual Texture
Worked Texture

Writing Assignment:

Use the vocabulary on the previous list along with other elements and Principles of Design to describe and interpret your work. The writing assignment should include your critique on the content and context and how these factors contribute to the concept of the work you have created. A general description of formal qualities should be addressed as they pertain to the concept, yet a stronger focus on content, context, and of course the idea (Concept) will foster a stronger discussion.

  • Look at the work analytically.
  • Remove yourself from the work to create new perspectives.
  • Be attentive to your gut reactions to the work.
  • Make notes of your observations” as reference. (In your sketch book)
  • Insert an image or sketch of your work within the word or pages document.
  • Content: Three to four paragraphs of text should be written before adding images.
  • Note: A paragraph is made up of three to five sentences.

Tools and Materials:

  • Eye Protection/Safety Glasses
  • Sketch Book
  • Utility Knife
  • Hobby knife
  • Dust Mask/Particulate Respirator
  • Safety Glasses
  • Focus Object
  • Materials for skin
  • Mixed media
  • Adhesives or other fastening materials
  • Rubber or Latex gloves (optional)

Create a label for your project with these specifics:

  • Name:
  • Dimensions: HWD
  • Materials:
  • Year Complete:
  • Course:

Tape your label to your project. Use masking tape so that it will not harm your project.

Objectives:

  • Method: Planning, Cutting Safely, Building techniques and strategies
  • Material Characteristics:
  • Three-Dimensional surfaces and skin transformations
  • Aesthetic qualities
  • Sensibility to form: Good design, clean aesthetics
  • Integrity of the artist to their craft
  • Concept from objects

Evaluation:

  • Work ethic: Participation in and out of class
  • Scheduling: Students stay on task, project finished by deadline, critique.
  • Craftsmanship and aesthetics.
  • Attention to detail and craft involved in the development of the object’s “skin” will be taken into consideration during grading and critique.  Therefore, ample time should be devoted to the completion of the project.

Caution:

This process may use chemicals and materials that might be dangerous for some people. Read the MSDS (Material Safety Data Sheet) for questionable materials. A respirator should be used when materials off gas or fume. A dust mask may be used rather than a respirator. The respirator will provide better protection.

Research/Inspiration: 

Project Gallery

Plaster Carving Non Objective Form: Abstraction Morphing/Transformation

Wheatly_MMission: (Project Description)

Using two forms build one, morphing the forms together to become a non-objective or abstract formal composition. The original forms are to be used as inspiration to assist in guiding the form. Use elements from each, yet develop your sculpture as a unique entity with an elegant form and a clean aesthetic. Original chosen objects may be mechanical (man-made) or natural.

  • Bring a wire cloth hanger and nylon stocking. This will be used to build a non objective form to base your carving to. The wire will be an armature for the nylon which will become a surface and skin.
  • Bring two interesting objects from home, which are approximately the size of your hand. Objects may be mechanical or organic.
  • Bring a container to build a blank. (1 gal. container.)
  • Create a blank from plaster.
  • Brain storm and Sketch ideas.
  • Plaster Carving: Create an abstract form from objects and sketches.

Sketchbook Assignments: (Five pages)

  • Assignment 1: Sketch original objects in your sketchbook. (3 views of each, 2 pgs)
  • Assignment 2: Preliminary and in process sketches of plaster form. (3 pages)

Additional Criteria: Strategies, Technique and Composition: (Project Description)

  • Clay may be used as a modeling/sketching tool: Sketches do not always start in the sketch book. Model, in clay an abstract form, drawing characteristics from your two objects. This will assist you in developing the composition. Images of these moquettes may be placed in your sketchbook and are valid sketches.
  • This project relies on the elements of light and shadow. Carve so that light and shadow create the dynamics of the form. No paint, pigments or inks should be used for this project.
  • Use repetition, directional curves and form to create a since of movement.
  • Develop a composition with movement that will draw the viewer around and into the form.
  • Use models, sketches and your own intuitive inspirations to create. Process will play a great part in your exploration as you learn the material, developing carving techniques and sensibilities.
  • Think about how these objects work together to create one form or how one may seem to dominate over the other, seeming to swallow or assimilate.
  • Craftsmanship: Elegant form and a clean aesthetic should be a goal.
  • Pay attention to building a form that has interior definition as well as exterior. Carving and modeling in the interior of the object will challenge your abilities, as always you are encouraged to push beyond the average.
  • Do not leave any indication of the container of your original form. Work the whole form.
  • Remember its okay to go back to sketches drawn or sculpted to alter and redesign your composition as you work through the project. This is a part of the process.

Tools and Materials:

  • Clay for sketching (Plasticine)
  • Plastic or wax Container- Bring your own. Plastic or wax coated.
  • Pottery Plaster No. 1
  • Sanding Screen (Drywall Sanding Screen or sand paper)
  • Sketchbook
  • Plaster Drywall wrasp
  • 8” Rasp- Purchase at art, wood or craft stores
  • Other Scraping Tools: Spoons forks, Files, Knives, Drill
  • Clay trimming tools, spoons, knives, forks, old saw blades (be inventive)
  • Dust Mask

Project Critique:

  • Project should be finished before the beginning of class critique session.
  • Projects will be discussed during the critique.

Think About:

  • The Elements of Design: line, texture, shape, light, form, space, time,
  • The Principles of Design: balance, proportion, rhythm, emphasis, and unity
  • Exterior vs. Interior, Primary and  Secondary Contours, Positive & Negative Forms, Static and Dynamic Forms

Photographing your work:

Photograph your work: A minimum of two types of images of your object should be made and emailed to the instructor of this course.

As an artist, a good portfolio will always set you apart from the rest of the crowd. When it comes to artist portfolios, pictures of your artwork are usually the first time a person may be introduced to your work. The images you provide are usually what make the biggest first impression. There for, it makes sense to practice photographing your art at the beginning and throughout your art career.

Image 1: 3-D portfolio image:

Neutral Setting Studio Shot: Should have no visual relationship to other objects. One should not be able to determine the size of your finished form. Good composition, good lighting and the best representation of your object is the goal. Minimize unnecessary shadows and highlights. A grey screen and lighting is available in room FAC 183. Take many shots of several sides of the piece. View them all on a computer screen before editing to the best.

Image 2: Creative Monumental Composition Using Forced Perspective:

Create the illusion that your sculpture is monumental by using forced perspective. Forced perspective techniques manipulates our human perception with the use of optical illusions to make objects appear larger, smaller, farther, or closer than they actually are. Movie makers sometimes use forced perspective to turn plastic toys and other objects into gigantic forms and characters we see on screen. The use of digital effects today still incorporates this popular way of portraying scenes or objects. A search on the web should gain several hits on strategies for creating a forced perspective image.

Before Critique:

Write a short paragraph about the form.

  • Descriptive, poetic, narrative…..What is or can the piece be about?

During Critique:

Reactions to work done by peers.

  • Use your own dialogue and the following:
  • Reactions to form: Positive reactions-Negative reactions
  • Sensibility to form:
  • Elements of Design:
  • Principles of Design:
  • Concepts: What ideas come to mind when you look at the object?
  • Relax: Keep an open mind.

Research/Inspiration:

 

Project Gallery

Cardboard: Mechanical Objects to Cardboard Objects

11MarquezStudent_2013In this project you are to use reclaimed cardboard to render everyday objects. The cardboard structures emphasize the importance of reusing and recycling materials and should provide an inspiring example of creative thought and innovation through repurposing materials.

Mission: (Project Description)

Your mission is to build a mechanical object from the structural and aesthetic qualities of cardboard. Using cardboard, adhesives and possibly some fasteners (such as string, nails and screws) you will be building a 3 dimensional duplication of a mechanical object/device. The finished form should be at least 18 inches in one dimension. Glues are allowed on this project. Tapes or fasteners may be used as well. Hide them and use them strategically, to develop a consistently crafted object. Think: craftsmanship!. Folding, cutting, de-lamination, lamination methods and strategically placing cardboard in a consistent structural method should be a goal. Conservation of materials should be considered as well. Size and weight of the final object is a usual obstacle for sculptors.

Project Description:

Find and choose a mechanical object to model

Begin by planning and drawing: Experiment with cardboard, illustration board, foam core, or thick papers to learn how structures can be built.

Sketchbook Assignment:

Five pages of notes and drawings for this project is required: Draw at least 5 views; a top, a side, a front, a back, a bottom, and perspective views. Details should be considered, as well. One drawing per page. Printed photos can be added as well. You should consider on each of these drawings, details on how you plan to structure or put your piece together. Measuring and recording your dimensions here will also assists in your mission.

Scale:

Drawing and measuring is good research and development. The object you chose will be scaled to at least 18 inches in one dimension. Use “Multiplication” to Scale your object. Example: If your original object is six inches in its longest dimension. You will need to scale the object up three times its original size to achieve the 18 inch finished dimension. Ergo each component part’s measurement will be multiplied by three.

Maquettea:

Small maquettes with paper or illustration board as a starting point will allow you to work out a lot of unforeseen issues when you get to the building stage of your project.

Modular:

If you chose to make your form modular, assembles and disassembles for transport and storage, consider the following. While cutting openings for interlocking card board pieces make the openings large enough so that assemblage and break down are easily done without any damage to your piece.

Production:

The cutting room floor: Your task is to develop a 3-dimensional solution to this problem, with a clean approach to aesthetics (Good Design), good to excellent craftsmanship and a conservative use of materials. THe finished piece must be 18 inches or greater in one of its dimensions. A major goal is to construct the form entirely of cardboard and glue.

NOTE: Please refrain from cutting on the table surfaces. Use a matt of cardboard or other material if you use the table. The floor works well to give one space to work and cut without damaging the table surfaces.

Tools and Materials:

  • Utility Knife/ Exacto knife
  • Tape
  • Wood glue
  • Cardboard
  • Cardboard paper
  • Pencils
  • Rulers and Measuring tapes
  • The Wood shop

Objectives:

  • Material Characteristics:
  • Cardboard: Structural and Aesthetic qualities
  • Method: Planning, Cutting Safely, Building techniques and strategies
  • Sensibility to form: Good design, clean aesthetics
  • Integrity of the artist to their craft

Research/Inspiration:

 

Project Gallery

Wood Transformation

05MarquezStudent_2013

Premise:

In this project the student is asked to create a sculptural form from wood material. The form does not necessarily need to look like a specific thing. It may be non-objective if desired. If the goal is to create a representation of a real object, a model should be made available. As a basis 2×4 material may be purchased. Students are expected to acquire their own materials for the project.

Scale:

A composition of two feet in one direction is expected.

Sketchbook Assignment:

Sketches of your chosen object should be rendered before and during sculpting. A minimum of four pages should be dedicated to this sketching component. In addition, find four wooden sculptures that inspire you. Printed images of these sculpture or objects should be placed in your sketch book. Your sketch book will be graded along with your project.

Wood Shop:

Before cutting any materials in the wood shop, Make sure all staples and metals are removed from the wood material. Make an extra effort to affirm that no screws or nails remain in purchased or reclaimed wood.

Using the table saw, trim the rounded corners from each 2×4 and other milled wood. This will assist in hiding seems when wood is laminated together.

Each students must use the band saw, reciprocating saw/jig saw, table saw, drill press and compound miter saw in the forms construction. Hand tools should be used as well, files rasp, grinders etc.

Finish:

The forms may be painted. Remember, paint does not necessarily make wood look like something else. If one can see wood grain through the paint then, the form still looks like it’s made from wood. Other surface treatment method may be used with instructor approval.

Glue, nails, screws, or any other means may be used to attach the wood forms together if needed. Challenge the norm, what other material can be used to fasten this material together. Remember, make an extra effort to affirm that no screws or nails remain in wood before sawing the material.

Challenge yourself in how you might subvert the inherent qualities of the material.

What does it take to push something visually beyond what it initially begins as?

Note: Do not use other material to sculpt the object or its components. Focus on utilizing wood as the main source of material for the construction of the form.

Inspiration:

Project Examples: